Ghost ST-Sim results scenarios

Deliver geospatial models direct to decision makers with SyncroSim › Forums › ST-Sim & State-and-Transition Simulation Models › Ghost ST-Sim results scenarios

Tagged: , , ,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 6, 2024 at 1:43 pm #23297
    mhemstrommhemstrom
    Participant

    Has anyone else had old, supposedly deleted results scenarios showing up in charts? I’m using SynchroSim v 2.5.13 and ST-Sim version 3.4.6. When I create a line chart for results scenarios, I see an entry in the legend for an old scenario that I deleted. I’ve compacted and saved the new runs, but the old results scenario still shows up. This seems to mess with one of the scenarios I haven’t deleted but have selected for inclusion in the chart…it has a flat line even though it ran and I specified saving (in this case) transitions data.

    June 6, 2024 at 9:57 pm #23298
    leonardo-fridleonardo-frid
    Keymaster

    Hi Miles, have you tried clearing the chart cache? To improve performance, SyncroSim stores a cache of scenario results associated with each chart. If the app is not closed properly the cache can get out of sync with results. You can delete the cache by navigating to the library root folder and deleting the folder called [Library Name].ssim.temp. Give that a try and let us know if you are still experiencing problems.

    Cheers,
    Leonardo

    June 8, 2024 at 1:24 pm #23301
    mhemstrommhemstrom
    Participant

    That worked. Thanks, Leonardo.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.