Menu Close

mhemstrom

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • in reply to: Random non-spatial initial conditions #20312
    mhemstrommhemstrom
    Participant

    Thanks very much for the info, Leonardo. All this time, I never knew that. Problem solved.
    Miles

    in reply to: Mysterious run failure problem #1839
    mhemstrommhemstrom
    Participant

    I’m still getting this error:

    [Failure] Could not complete operation on some files and directories. See the Data property of the exception for more details.

    The Data Sources tab shows no pathways. But there are pathways in the source scenario. Argh! Any ideas?

    in reply to: Transition multipliers in v. 1.4 No Stratum column? #1838
    mhemstrommhemstrom
    Participant

    Oh…OK. So the field is still there, just hidden. That works. Thanks.

    in reply to: initial conditions error message #1834
    mhemstrommhemstrom
    Participant

    Hi, Leonardo. I double checked the lower left coordinates. They seem identical to me. I’ll e-mail a zipped file with the rasters in it to you. Thanks for checking.

    in reply to: Windows 8 compatibility #1830
    mhemstrommhemstrom
    Participant

    I moved my desktop machine to windows 8 pro and am running StSim v 1.3.0 on it with no problems. As far as StSim goes, the upgrade to 32 gb of ram and windows 8 pro posed no problems at all. I have the OS and software installed on an Intel solid state hard drive. StSim runs quickly and doesn’t hit the mechanical hard drive except to write results. This is a good set-up for StSim.

    in reply to: How big is too big a landscape for ST-Sim #1824
    mhemstrommhemstrom
    Participant

    I found an error in the stateclass grid. When I fixed it, the model imported the stratum and stateclass grids just fine. So, I started a 5 year, 1 iteration test run using the 17 million pixel area. No error messages, but at 1 hour and 30 minutes, the model is still initializing and the resource monitor shows physical memory use at 97 percent of 16gb that I have in the machine. My guess is that the model is either not going to run or run extremely slowly given memory usage. I do need to run that large area, though, for a project. So, I may resample the input to 120m rather than 90m. That’s getting a bit large for pixel size, given the treatment scenario. So…any recommendations on a PC configuration that would run this model? And, does the model require Window 7? Most new machines with 32 gb of RAM come with Windows 8.

Viewing 6 posts - 1 through 6 (of 6 total)