Use for Geospatial Data. Syncrosim › Forums › ST-Sim & State-and-Transition Simulation Models › Use for Geospatial Data. Tagged: new documentation links. This topic contains 3 replies, has 3 voices, and was last updated by Leonardo Frid 3 weeks, 2 days ago. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts August 10, 2018 at 4:32 am #6160 subrata7Participant Can we use geospatial data? If yes, so how we used? August 10, 2018 at 12:41 pm #6161 Leonardo FridKeymaster Here are a couple of examples of how geospatial data can be used: 1. When defining initial conditions for a landscape users can specify geospatial data (in the form of raster GeoTIFF files) for the starting strata, state class and age of each simulation cell (see http://docs.stsim.net/reference/prop_initial_conditions_spatial.html). 2. Geospatial data can be used to specify multipliers against transition probabilities for each simulation cell (see http://docs.stsim.net/reference/prop_transition_spatial_mults.html). This reply was modified 7 months, 1 week ago by Tom RoeAdmin. This reply was modified 3 weeks, 2 days ago by Leonardo Frid. Reason: fix broken links August 30, 2019 at 5:57 pm #7551 davidandersonParticipant It appears that the links in the reply post are broken. Also it appears that the manual that explained how to do the spatial input has been removed from the site. August 30, 2019 at 9:18 pm #7553 Leonardo FridKeymaster Here are the new links: 1. Spatial Initial Conditions: http://docs.stsim.net/reference/prop_initial_conditions_spatial.html 2. Transition Spatial Multipliers: http://docs.stsim.net/reference/prop_transition_spatial_mults.html I have also fixed the broken links in the original post above. Note that the new ST-Sim documentation at http://docs.stsim.net is still under construction but these two pages are complete. The old ST-Sim documentation can still be found at http://doc.syncrosim.com/index.php?title=SyncroSim The new SyncroSim documentation can be found at http://docs.syncrosim.com. Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic.